zur Navigation springen

spacerProducts: Projection

  spacer

HMI - High Performance Projectors

line line line
 
highest performance by Pani BP 12 Platinum
spacer  

BP 12 Platinum


The most powerful large format projector in the world.
It is using slide format 24x24 cm to enable passing the high quantity of light.
The high-efficiency slide blower reduces the slide stress to enable projection.
This projector allows covering large areas with images at once or using
long throwing distances.
Weight 120 kg           Datasheet:   zum Datenblatt

Universal ballast 220/240V 50Hz,
208/220V 60Hz for HMI lamp
12000W/225V. Weight 124 kg.

BP 12 Platin  
Pani BP 6 GT, top level of TURBO-generation

BP 6 GT (Turbo)


High Performance HMI Projector 6kW for Slide Format 18x18 cm.
New calculated high grade condenser system. More than double of the light output when compared to the legendary BP4 HMI/II scenic projector.
The high-efficiency slide blower reduces the slide stress.
Weight 72 kg.           Datasheet:   zum Datenblatt

Universal ballast 220/240V 50Hz, 208/220V 60Hz for HMI lamp 6000W/123V.
Weight 76,5 kg.

BP 6 GT  
 

XENON - High Perform. Show Projector

line line line
 
dynamische Projketionen mit dem Hardware Xenon 5-7kW Show Projector
spacer  

Hardware Xenon 5 - 7kW Show Projector


This projector operates with a 5 kW or a 7 kW Xenon lamp.
The Optimal Light System (OLS) spreads the standardly inhomogenious
light of the Xenon lamp over the projection area to reach better homogenity.
The acessories as there is the 360° rotating double scroller make the machine
to an allround applicable show projector
Weight lamphouse 75 kg           Datasheet:   zum Datenblatt - leider nur in Englisch

electronic ballast Europe 230V - 400V 50Hz
electronic ballast America 120V - 208V 60Hz , Weight 30 kg.

Hardware Xenon 5 - 7kW Show Projector  
 

HMI - Stage Projectors

line line line
 
Pani BP 4 CT (TURBO)
spacer

BP 4 CT (Turbo)


HMI-scenic projector for single ended 4000W daylight HMI-lamp (71% higher light output in average than BP2.5CT).
With special yoke for optional base or hanging. Slide carrier for 2 slides 18x18cm. High performance condenser system with interchangeable front condenser lens, cold light spherical reflector and a special multi function filter (PANI-Universal Filter). Built-in blowers for optical system and slide cooling. Optional remote control ON/OFF by DMX-signal.
Weight 65 kg.           Datasheet:   zum Datenblatt

Universal ballast for HMI -lamp 4000W/200V. Source voltage 208/220/240V, 50/60Hz. Primary cable with open leads. Interconnecting cables between ballast and projector for control and lamp circuit 3 meter each with connectors.
Weight 61 kg.

BP 4 CT  
Pani BP 2,5 CT (TURBO)

BP 2,5 CT (Turbo)


HMI - Scenic projector 2500 W/230 V/ daylight HMI (metal halide), with special yoke for optional base or hanging. Slide carrier for 2 slides 18x18cm.
High performance condenser system with interchangeable front condenser lens, cold mirror spherical reflector and a special multi function filter (PANI-Universal Filter). Built-in blowers for optical system and slide cooling. Optional remote control ON/OFF by DMX-signal.
Weight 49 kg.           Datasheet:   zum Datenblatt

Ballast for single ended HMI -lamp 2500W/115V. Source voltage 208/220/240V, 50/60Hz. Primary cable with Schuko connector. Interconnecting cables between ballast and projector for control and lamp circuit 3 meter each with connectors.
Weight 30 kg.

BP 2,5 CT  
BP 1,2

BP 1,2


HMI - Scenic projector 1200W/230V/ daylight HMI (metal halide), complete with
special yoke for hanging or standing mount.
Universal condenser system for 11 to 60 cm objective lenses. The exterior
appearance is similar to that of the BP 2/II, but the light output is increased
by a factor of 3. Slide stage for 18x18 cm slides. Built-in tangent blower for
slide cooling, includes elapsed hour meter, without objective lens.
Weight 23 kg.

Ballast for HMI-lamp 1200W/100V. Power cable with Schuko connector, 3 meter connectorized control/lamp interconnecting cable between ballast and projector.
Remote control capability. Weight 20 kg.

BP 1,2  
 

Halogen Projectors

line line line
 
Pani BP 2500 Halogen / BP 3000 Halogen
 
spacer

BP 2500 Halogen / BP 3000 Halogen


Halogen Scenic projector 2500W/230 V, similar in light output to the BP5/II. With special base and yoke for hanging. Slide stage for 18x18cm slides. Spherical condenser system with cold mirror spherical reflector. Interchangeable front condensor on selection G 503 for 11 to 27cm objective lenses, G 505/II for 33 to 60 cm objective lenses. Built-in blowers for reflector and slide cooling. Weight 45 kg.

This projector is also available with a
3000W lamp (100V or 120V).
In this case it is called BP 3000 Halogen
BP 2500 Halogen / BP 3000 Halogen  
Pani BP2/II

BP 2 / II Halogen Projector


Compact Halogen Scenic projector 2000W/230 V.
Complete with special yoke for hanging or standing mount.
Slide stage for two slides 18x18 cm. Universal condenser system for 11 to 60 cm objective lenses.
Built-in tangent blower for slide cooling.
Weight 23 kg.
Halogenprojector BP 2 / II  
 

Special Projectors

strich
 
strich
 
strich
 
Pani AP 2 Architecture Projector spacer

AP 2 Architecture Projector

As an improved version of ARC II, the worlds first projector with
HQI - technology with its increased lamp life time, the
PANI AP 2 targets on the Architectural Lighting and fixed
installations market and is mostly used for advertising projects.

The AP 2 is controlable via DMX 512 as well. This projector
is also tested for vertical projection up and down and
so it is able to fulfill a lot of specialised requirements.

Weights: projector 33kg, ballast 28kg

AP 2 Architecture Projector
spacer
 
    Here you find click here for the projectors ACCESSORIES for the projectors.
spacer    
PANI Projection and Lighting Vertriebs GmbH, A-1070 Wien, Kandlgasse 23, Austria, Europe

english version